Your air conditioner is one of the most important appliances in your home. It not only keeps you cool and comfortable during the hottest days, but it also helps to keep your electricity bills down by using less energy when operating at a higher efficiency.
If you are unsure if your AC unit is properly sized for your home, then this article provided by our team at Top Air Cond Services will help you determine that!
How to Tell If Your AC System Is Correctly Sized
There can be instances where you could be confused whether what size your AC system needs. One of the most common misconceptions is that a unit should be as powerful as it can get, but this isn’t true!
To find out if your AC system is correctly sized, you must measure how much power and airflow are required to cool an area in which people will spend time during hot weather.
If you are unsure if your AC system is properly sized for your home, then this article provided by Top Aircond Services will help you determine that! To find out the correct size of the air conditioner to buy, please follow these steps:
- Measure the length and width of each room in square feet. Add up all four measurements to find the total square footage.
- Take an average of how much power and airflow is required for each room to know what size your AC system needs.
- Measure the length and width of your home’s exterior walls in feet, then multiply that number by 12 inches to get the square foot measurement. Divide this number by the square footage of your home to find the percentage.
- Add up all four measurements and divide that number by three. The resulting number is what you should use when selecting a size for your new air conditioner!
The Types of Air Con System
Before measuring your AC size, you should also be aware of the different types of systems that you can choose from.
There are different types of Air Con systems and these are:
Central AC: These systems are considered the most efficient, but they also require a lot more work to install and maintain.
They use up less energy than any other type of system because it’s fully controlled by one air handler unit, which distributes cool air throughout your home with no ductwork needed.
It can be used in homes where cooling is only required for one or two rooms such as an office space!
Ductless Air Conditioning: This variety uses special wall units called “split-type” units that distribute cold air into the room without using ducts.
As opposed to central AC, these units don’t need their outdoor condenser; instead, each “split-type” unit has its condenser and compressor which are installed separately in your attic or roof.
The downside is that they don’t cool as large of an area, but the upside is that you won’t have to pay for the installation of ducts!
Window Air Conditioner: These units come equipped with a small window air conditioner built into the bottom half, so it can be inserted directly into a single open window.
They’re not recommended if you need cooling throughout your home since these only work when being plugged in one room at a time, such as on an upper floor, due to the extension cord supplying power limitations.
Knowing the different types of systems can help you make the educated decision of which one is best for your home and needs!
Tips in Choosing The Right Aircon Unit
To avoid mistakes and to ensure that you pick the right unit for your needs, you should follow these tips:
- The main thing to remember when buying an Air Con unit is that choose a unit that is at least as powerful as the one you have now.
- If your current AC system is 15,000 BTUs, and it’s not sufficient any more because of an increase in square footage or more people living inside the house, then you’ll need to buy one with at least 20,000 BTU/hr output for each room!
- Determine how much power and airflow are required by measuring all four rooms separately. Subtract any areas where there will be no cooling requirements from this total number to calculate what size your new air conditioner needs to be!
- Make sure that when buying an Air Con unit that you’re replacing similar type units like window ac or central AC..
- Measure the length and width of your home’s exterior walls in feet, then multiply that number by 12 inches to get the square foot measurement. Divide this number by the square footage of your home to find what percentage you should use!
Selecting an air conditioner can be a challenge, but it will come easy if you know about the basics, such as the 3 types of air conditioners and how you can measure their correct size.
In this article, we have given you a guide to follow including tips you can practice when installing an air conditioner
If you found this article helpful, please let us know by leaving a comment.