Most people think that they can service their own air conditioners without any problems. However, this is not always the case. In fact, many people end up making common mistakes that can lead to costly repairs or even complete system failure. In this blog post, we will discuss some of the most common mistakes people make during DIY aircon servicing.

Not Checking Your Filters

Not Checking Your AC Filters

One of the most common mistakes people make during DIY aircon servicing is not checking their filters. This may seem like a small thing, but it can actually have a big impact on the efficiency of your air conditioner. If your filter is dirty, it will restrict the flow of air and make your system work harder to cool your home. As a result, you may see an increase in your energy bills. In some cases, a dirty filter can even cause your air conditioner to overheat and break down.

Ignoring Strange Noises

Ignoring strange noises is a common mistake people make during DIY aircon servicing. The problem is that these noises can be an indication of a serious issue, and if they’re ignored, the issue will only get worse. For example, grinding or screeching noises can indicate that the fan motor is starting to fail. If this problem is left unchecked, the fan motor will eventually burn out, leaving you with an expensive repair bill. Similarly, clicking noises can indicate that there’s something caught in the fan blades, which can cause the fan to overheat and break down.

So, if you hear any strange noises coming from your air conditioner, don’t ignore them – call a professional for aircon servicing.

Forgetting To Clean Your Air Vents

One of the most common mistakes people make when performing DIY aircon servicing is forgetting to clean the air vents. Over time, these vents can become clogged with dust and other debris, which can reduce airflow and cause the air conditioner to work harder than necessary. As a result, it’s important to remember to clean the vents on a regular basis. The best way to do this is to use a vacuum cleaner with a soft brush attachment. Gently insert the brush into the vent and move it around in a circular motion to loosen any dirt or debris. Once the vents are clean, be sure to vacuum up any debris that has accumulated on the floor around the air conditioner. This will help to keep your home clean and dust-free.

Related Post:  5 Major Myths About Air Cond Services

Not Replacing Outdated Parts Or An Old Unit.

Not replacing outdated parts or an old unit is a common mistake people make during DIY aircon servicing. Over time, parts wear down and need to be replaced in order to keep the unit running properly. Failing to do so can lead to a number of problems, including decreased cooling capacity, increased energy consumption, and even complete failure of the unit. While it may cost more initially to replace these parts, it will ultimately save you money in the long run.

So, if you’re going to attempt DIY aircon servicing, be sure to replace any old or worn out parts. It could mean the difference between a successful repair and a complete disaster.

Using a dirty rag to clean your unit’s coils

It’s important to clean your unit’s coils on a regular basis as part of your DIY aircon servicing. However, using a dirty rag to do so is a mistake that many people make. The dirt and dust on the rag can act as an abrasive, causing scratches and other damage to the delicate coils. In addition, the dirt and dust can also impede the coils’ ability to absorb heat, making your air conditioner less efficient. If you’re going to attempt to cleanr conditioner’s coils yourself, be sure to use a clean, soft cloth. Otherwise, you risk damaging the coils and making your air conditioner less effective.

Ignoring water in the drain pan or not cleaning it out after servicing

It’s important to empty the water from the drain pan after servicing your air conditioner. However, many people make the mistake of ignoring it or not cleaning it out properly. The drain pan is responsible for collecting water that condenses on the evaporator coils. If it gets full, the water can overflow and damage the floor or furniture nearby. Even worse, if the water is left to sit, it can start to corrode the metal parts of the air conditioner, causing it to break down. To avoid this, it’s important to empty the drain pan on a regular basis and clean it out whenever you service your air conditioner. This will help to keep your air conditioner in good working condition and prevent any costly repairs.

Related Post:  5 Ways to Keep Your Air Conditioner Running Smoothly


These are just a few of the most common mistakes people make when performing DIY aircon servicing. If you’re not careful, you could end up causing more harm than good. So, if you’re going to attempt it, be sure to do your research and take the necessary precautions. Otherwise, you may find yourself regretting your decision later on. Now that you know what not to do, good luck! And remember, if in doubt, always consult a professional. They’ll be able to properly diagnose and fix any problems you may be having.